Quality control Product Range

Draw Down Coater
Draw downs can be made on variety of substrates such as plastic films, paper,

board metallised films, metal plates, foil and textiles etc

Laboratory Auto Drawdown Coating Machine & Mayer Bar Coater


  • Most suitable as an instrument for ISO 9000 certification.
  • Operates on a simple lever arm assembly, giving precise weight on metering or coating rod and also prevents rotation of rod during coating stroke.
  • Eliminates “Human” error involved with ‘HAND OPERATOR’ DRAWDOWN equipment and variation in rod angle and rod pressure.
  • Controls drawdown speed (better than hand drawdown).
  • Precision equipment which can be operated both by unskilled or skilled operator, to produce consistent and repeatable results

Digital / Computerised Static and Kinetic Coefficient of Friction Tester


As per ASTM D – 1894 to determine the coefficients of friction of plastic film and sheeting.


  • Capacity : Up to 9.999 kg.
  • Direct display : Static and kinetic friction values.
  • Speed : 150mm/minute.
  • Weight of sled : 200 grams.
  • Accessories : Three nos. of S.S templates.
  • Paint : Powder coated.

Power : 230 Volts, 50Hz, single phase.

Inclined Plane Tester (COF Tester)


As per Tappy T – 815 standard to determine the coefficients of friction between film to film,
film to metal and film to glass.


  • Speed : 1.5º to 2.0º / second.
  • Weight of the sled: 750 grams.
  • Size of sled : 4 inch X 2 inch.
  • Accessories : 2 nos. of S.S templates.
  • Paint : Powder coated.

Power : 230 Volts, 50Hz, single phase.

COBB Tester

cobb-testerThe test is used for determining liquid absorptiveness or resilience of treated and untreated papers, boards, fabrics and other sheet materials. The roller method is recommended to insure better consistency and reliability that can be obtained by manual blotting or rubbing the specimen.


  • Test Area : 100 cm2
  • With measuring cylinder for pouring 100 ml water
  • Is the grams of water absorbed by 1 Sq. Mtr board surface during flooded contact with 2.5 cm (1.0 inch) water column for 30 minutes.
  • With Non-Corrosive couch roll of 10 Kg
  • User friendly tilting device
  • Weight -15 kgs

Seal/Bond Tester

bond-testerThe test method quantifies the permanence of adhesion or peel ability of self- adhesive pressure sensitive materials. Peel adhesion is the force required to remove pressure sensitive coated material, which has been applied to a standard test plate under specified conditions from the plate at a specified angle and speed.


  • Test Speed : 300 mm per minute
  • Capacity: 20 kgf. (other capacity available on request)
  • Least Count : 2 gm


Dart Impact Tester


  • Specimen size: 127mm
  • Specimen size: Strips of 240mm width
  • Release Mechanism: Electro magnetic
  • Diameter of dart head: 38mm
  • Weights: Ranging from 5-500 gram supplied
  • Height fall: 220,660,1524mm
  • Counter : Digital

Gloss Meter

gloss-meterThe Surface luster measure for printing ink, oil,paint, coating and wood work, marble.The Surface luster measure for plastic and sheet and other non-metal materials.


  • Projecting Angle: 20º/60º/85º
  • Measure Range: 0-200 GU
  • Stability: < ± 0.4 GU/ 30 min
  • Value Error: < ± 1.2 GU
  • Power: AAA1.5V*2
  • Environmental Temperature: 0ºC – 40ºC
  • Relative Humidity: ± 85%
  • Dimension: 145*79*38mm
  • Weight: 380gm